Top 10 Safety Precautions for Agricultural Machinery

Top 10 Agricultural Machinery Safety Precautions cover three core areas: compliance with license and documentation management, equipment safety inspections, and personnel operating standards, spanning key stages such as field operations, road travel, and emergency response. Core Safety Standards - Valid and complete licenses and documents: Tractors and combine harvesters must be registered and undergo annual inspections; operators must hold valid certificates and carry their driver's license and vehicle license while working. - Equipment safety inspections: Check brakes, steering, and lighting systems before daily operations, ensuring protective guards, spark arresters, and reflective markings are intact, and fire extinguishers are effective and easily accessible. - Strictly prohibited operations: Including drunk driving, fatigued operation, and using phones during work; unauthorized modification of safety devices or removal of protective components is forbidden. Field Operation Management - Hazard zone control: Clear obstacles from the work site before operations, set up warning signs, prohibit non-operating personnel from entering dangerous areas, and have a designated person direct reversing while confirming blind spots are safe. - Machinery running protection: It is forbidden to clear blockages while the machine is not shut down; power must be cut off before handling rotating parts such as combine cutter rolls and threshing drums. - Fire and explosion prevention: Open flames are strictly prohibited in the work area; exhaust pipes must be equipped with spark-extinguishing devices; promptly remove straw entanglement to prevent friction-induced fires. Special Scenario Standards - Road travel safety: Comply with traffic regulations, turn on lights and reflective markings at night, maintain low speed on icy or snowy roads, and avoid coasting in neutral when going uphill or downhill. - Emergency fault handling: In the event of a malfunction, immediately shut off the engine and set up warning signs; if fuel catches fire, use a fire extinguisher to put it out—never use water.