Precautions for Starting and Shutting Down the Machine

What should be noted when starting and shutting down the machine 1. Before starting the machine, walk around it once, remind everyone to stay away from the machine, and start the machine after sounding the horn. 2. For the machine's working attachments, accessories, or remote connections, all potential hazards to workers in the working environment should be pointed out. 3. Before starting the machine, check whether the machine is in the braking state and place the front and rear control handles in the neutral position; check whether other control handles or switches are in the middle or off position. 4. Before starting the machine, adjust and lock the seat, and fasten the seat belt. 5. The machine can only be operated after the operator is seated in the cab seat with the seat belt fastened. 6. Do not attempt to disable the internal safety interlock system. Once the system is found to be malfunctioning, it must be repaired immediately. 7. Under any circumstances, cables should only be connected in the manner recommended by the manufacturer. Any incorrect connection may cause the battery to burst or lead to unpredictable erroneous operation of the machine. Before connecting, do not block or damage electrical components. 8. Do not operate the machine in an enclosed space without ventilation. 9. When conditions permit, park the machine on flat ground as much as possible and use chocks under the wheels or tracks. 10. Before leaving the cab, lower the working arm and attachments to the ground, shut off the engine, and lock the operating lever in the upward position. 11. When leaving the machine and no one else will continue to use it, remove the ignition key, shut off, and lock the cab.